Tackle heavy-duty recovery work with confidence with Jerr-Dan's HDL 700/350 35-ton Independent wrecker. This is the perfect choice for recovery when you need heavy-duty power, extra capacity and extreme versatility. An independent three-stage underlift provides maximum flexibility for any towing situation.

Top 5 Reasons

Download Brochure (PDF)
Adobe Acrobat Reader is required to read any PDF document. Click here to get the
free version of Adobe Acrobat Reader.

WRECKER'S Feature Demo
Body
  • 110" Main Body (CT)
  • Two Horizontal / Two Vertical Compartments
  • Aluminum Sub-Structure with Composite Panels
  • Independently Rubber Shock Mounted Body
  • Built In Tool Storage and Chain Racks
  • Stainless Steel Paddle Latches
  • Gas Spring Door Assist
Boom
  • 2-Stage Independent Hydraulic Extendable Boom
  • Wire Rope/Cable Boom Paint Protectors
  • Wire Rope/Cable Tie Backs
Controls
  • Passenger and Driver Side Fully Proportional Manual Hydraulic Controls
  • 6 Function Wireless Non-Proportional Underlift Controls
  • Emergency Engine Stop - Passenger and Driver Side
Hydraulics
  • Hydraulic Valve with Variable Flow Control
  • System Pressure: 3,000 psi
  • Hydraulic Reservoir with Sight Gauge, Fluid Cut-Offs and Magnetic Clean-Out Provisions
  • Two 10 Micron In-Line Return Filters with Pressure Gauges
  • Direct Mount Tandem Gear Hydraulic Pump and Air Shift PTO with Engagement Indicator Light
  • Dual Hydraulic Pressure Gauges (passenger side)
  • System Overload Protection
Lighting
  • Tool Compartment Lighting
  • Control Station Lighting
  • FMVSS 108 Lighting
  • Aerodynamic Light Pylon with pair of Winch Lights
  • Lower Hookup Lights (pair)
  • Nine Function Switch Panel
Miscellaneous
  • Eight Recovery Anchors Each Side
  • Mud Flaps
  • Recessed 7-Way Electrical Connector
  • Recessed Glad Hand Connections
  • Back-Up Alarm
Paint
  • Prime Finish
Rear-Spades
  • Hydraulic Controlled Rear Spades with Integrated Recovery Anchors
Underlift
  • Five Sets of Underlift Tools
  • One Set of Spring Lift Attachments
  • Alloy Steel Safety Chains with Storage Pockets
  • Alloy Tie Down Chains
Winch
  • Dual 25,000 lbs Planetary Gear Winches
  • Winch Air Cable Tensioners
  • Passenger Side Remote Air Controlled Winch Free Spool Releases
  • Cable/Wire Rope 5/8" dia x 200'



Patents: 5,782,596 & 5,839,775 and other Patents pending

The load carrying capacity of any truck is determined by the GVWR of the truck cab/chassis. It is important that you determine your truck has satisfactory carrying capacity and axle ratings for your specific application. Jerr-Dan's authorized sales representatives are available to assist you in this regard. Specifications shown are subject to change without prior notification and some equipment shown may be optional. Please consult your factory authorized Jerr-Dan distributor to verify equipment specifications

The tow rating of your recovery equipment is limited to the actual GVWR (Gross Vehicle Weight Rating) of your recovery vehicle, or the capacity of the equipment being used. For example, the GVWR of your recovery vehicle should not be exceeded by the GCW (Gross Combined Weight) of both towing and towed vehicles. This is the actual weight of the towing vehicle plus the towed vehicle(s) including: payload, driver, passenger(s) and fuel. (Everything that moves with your recovery vehicle.) However, if the towed vehicle has independent braking activated from the towing vehicle, the combined weight towed, will be the weight of the towing vehicle plus the lifted weight of the towed vehicle, which combined should not exceed the GVWR or the GAWR of the rear axle of the towing vehicle, or the capacity of the equipment used.

All ratings comply with SAE J2512 recommended practices.

Home | About Us | News | Customer Service | Jerr-Dan Life | Distributor's Login | Contact Us | Privacy Policy | Site Map

Wreckers | Carriers | Jerr-Dan Advantage | Tow Trucks | Heavy-Duty Tow Trucks | Rollbacks

© Jerr-Dan® Corporation, An Oshkosh Corporation Company. All Rights Reserved.